Chemicals, Odors, and Pathogens
BioKill®, Model-100 Vehicle Odor Eradicator ($2,995) [Payment Terms Inquiry]
Stinky, unsalable cars are converted into sales with this portable, powerful model It is designed as a powerful odor eradicator for vehicles - automobiles, trucks, RV's, boats, and train cars. It eliminates embedded odors and mold spores and can even be used to clean up shipping containers for reuse.
The unit works by molecular disintegration of suspended organics flowing through it. It also exports an extremely high ozone gas concentration that reaches down into the air conditioning system of the vehicle, particularly the coated condenser surfaces, to dislodge and suspend those ador particles so they will flow through the BioKill unit for complete eradication.
This model comes equipped with a job timer that is selectable up to 60 minutes, but 15-20 minutes per job will usually suffice. It has aluminum hose ports which accept slide-on 2.5 inch diameter flexible hoses to simplify vehicle setup and cleaning. A 10 feet flexible hose is included with the unit. To further simplify your job a portable dc-ac inverter that connects to the car's battery terminals is also included with the unit, allowing you to perform each odor eradication job without having to run an electrical cable to the
parking lot if you choose. Combined with its ease of portability and ruggedness,
this equipment produces immediate results, and produces them with a minimum of service labor attention.
The product brochure can be downloaded here.
BioKill® Model-200 Property Restorer ($3,995) - [Payment Terms Inquiry]
BioKill®-200 provides extra power to remove fire, smoke and water damage. This powerful commercial equipment is ideally suited for decontamination of odors, chemical vapors, surface mold and spores. It works by internal molecular disintegration of suspended organics, exporting an extremely high ozone gas concentration that dislodges and suspends contaminants that are then eradicated inside the device. Unlike many inferior methods and technologies, this powerful equipment produces immediate results!
Compared to the smaller Model-100, BioKill® is a more powerful, yet still compact and portable decontamination unit. These products use “suspend and eradicate technology” rather than relying on basic “ozone burn” like other products. They work by first dislodging contaminant molecules (odors, mold, mildew, bacteria, virus) from the surfaces where they cling, suspending them in flowing air that is then sucked into the unit. Inside they impact a special screen where they are permanently destroyed. To accomplish this BioKill® starts with ozone, created cleanly from natural air. The ozone reaches around corners and into crevices to temporarily dislodge contaminants coated on surfaces. Once suspended in the flowing air, the contaminants are carried into the BioKill® where they impact a screen covered with free radicals. Those highly reactive chemical species
aggressively pull electrons out of all the contaminants long chain carbon molecules, disassembling their organic matter. Once started, the dismantling process cascades, eventually eradicating all the contaminants fragments, reverting their matter back to the natural elements from which they were composed, primarily carbon, nitrogen hydrogen, and oxygen. The eradication process is instant at the molecular level, without residue. The unit is essentially self-cleaning.
BioKill® creates “clean ozone” in a closed treatment area, unlike basic ozone machines which need outside air. (Those use an electric spark that also creates toxic nitric oxide unless the air going into them is carefully pre-dried, and their spark-jump plates must be continuously removed and cleaned.) BioKill®-200 is self-contained, requires no air drying or plate cleaning, creates no toxic side effect chemicals, and actually uses moisture in normal air to help create its powerful dismantling species. BioKill® -200 is rated at 10,000 mg/hour ozone output, which raises the concentration of a test chamber to over 150 parts per million in 7 minutes! But instead of relying on its strong ozone production alone to inactivate some contaminants, BioKill® -200 follows through to eradicate all contaminants once they’ve been dislodged by its clean ozone.
S
urface mold, mildew, bacteria, viruses and their odors are huge problems for safe living conditions. This product eliminates those problems instantly, producing miracle results, over and over. BioKill®’s air flow is driven by an industrial impeller, not a cheap fan. The image on the right shows how BioKill™ eradicates 100% of a heavy Aspergillus Niger mold-spore concentration in a sealed test chamber in only 7 minutes! Its ability to operate as an unattended, self-timed, self-contained, “set-it-and-forget-it” unit in a sealed environment results in major service labor savings.
High power decontaminating technology is packed into this device. The unit is self cooling with a rugged impeller (not a cheap fan). In addition to being portable the unit has ports for 4" hoses on both the inlet and outlet ports.
The product brochure can also be downloaded here.
BioKill® Model-150 - Contents Remediation ($3,295) [Payment Terms Inquiry]
Mold removal includes cleaning of moldy personal effects. Mold-ridden dwellings often require partial demolition of interior walls, followed by mold spore eradication in the structure, then a rebuild phase. During this period personal property contents such as clothing, furniture, books jewelry, and collectables must be segregated, cleaned, and temporarily stored.
The BioKill® -150 is ideal for such contents remediation, since it cleans the possessions on site and avoids the need to remove them to an offsite location out of the owner's control. Connected by tubes to a large mylar bag, the BioKill®-150 can clean any contents placed into the restoration bag.
Because it is so powerful, BioKill®-150 will also destroy insects and other pests present in the contents, including bedbugs. Bedbug infestations in the Northeast U.S. have now spread swiftly to other states, particularly Florida. Model-150 is guaranteed to kill Bedbugs, their eggs, plus dust mites, fleas, ticks, spiders, mold, bacteria, viruses and odors when used in conjunction with its compatible contents purification bag.
Using this equipment you don't have to dispose of your contaminated valuable property, simply purify it instead, saving money that increases the value of anextermination service billing.
Model-150 is configured with positive cam-lock hose fittings to make job setup and execution simple and sure. Each unit comes with two 10 feet hoses of two inch diameter, fitted with aluminum and polypropylene cam-locks that connect the BioKill to the contents purification bag. Two 6 mil polypropylene bags large enough to accept a king size mattress are in
cluded with each BioKill®-150; All living matter inside the sealed bag is destroyed by the operating BioKill within 10 minutes. Then the bags may be temporarily sealed with included caps and the BioKill unit relocated to a different job if needed. When the purified mattress and other belongings are removed after about an hour, they may be used immediately.
BioKill®-150 is guaranteed to kill insects, including bedbugs and their eggs, when used properly in conjunction with its treatment accessories.
The product brochure can be downloaded here.
